DSI: The Capable Direct Spark Ignition System
Features
- Available with plastic enclosure or printed circuit board only
- Accepts 0.156 in, 0.200 in, or 1/4" Fast On® style connections
- Spark output with auto spark plug or 1/4" Fast On® terminal
- Meets IAS and UL1998 standards.
- Dual relay drive for safety
- Flame sensing through spark or separate ion electrode
- Self contained diagnostics
- Flame sensing by 'AC Rectification Method' eliminates errors due to contamination or moisture
- Advanced noise immunity
The model 2XXXX DSI was designed to replace over 70 different
types of direct spark ignitors currently in use. Micro-controller
based, embedded technology, is what makes the difference between
the 2XXXX and the competition. This universal ignition module
offers superior capability and an impressive price/performance
ratio.
The control is fully factory configurable, allowing one control
circuit board to handle various voltages, current, and current
timing requirements. Control operation is based on its integral
micro-controller's program execution. The Model 2XXXX takes advantage
of a new generation flash memory micro-controller I.C. This micro-controller
is factory programmed at the time of manufacture and does not
require the excessive time and minimum purchase quantities of
"masked" based designs. The device contains field proven
highly noise immune circuitry with redundant relay drive for reliability.
Applications
- Space Heaters
- Heating Broilers
- Dryers/tumblers
- Water Heaters
- Ovens
- Radiant Tubes
- Broilers
- Grills
- Deep Fryers
- Combo-boilers
Specifications
| Power: | 24 or 120 Vac +10, -15% |
| Current Max: | 180mA sparking, 40mA idle |
| Spark rate: | 10 Hz. Min. |
| H.V. output: | 15kvP with 50 pF. Load |
| Relay: | 120 Vac 5 A |
| Alarm output: | 1 A |
| Purge time: | See chart |
| Trial time: | See chart |
| Temperature: | 0 to 85º C. |
| Humidity: | 95% non-condensing |
| Mounting: | Multipoise |
| Life: | 2 X 106 sparks min. @ 85º C |
|
Model number selection chart
| A - Basic system type | C - Trial Time |
| 1 - 24V single electrode | 1-5 sec. |
| 2 - 120V single electrode | 2-10 sec. |
| 3 - 24V ion probe | 3-15 sec. |
| 4 - 120V ion probe | 4-20 sec |
| | |
| B - Connector Type | D - Purge Time |
| 1 - 0.156" pin header | 1-None |
| 2 - 0.200" pin header | 2-1 sec. |
| 3 - ¼" Fast On® | 3-2 sec. |
| Example: 21123 = 24V, 0.156" pin header, | 4-5 sec. |
|
|